[QuadList] VR-1200B Daily Servo Set UP
Trevor Brown
videovault at sky.com
Mon Aug 24 14:04:15 CDT 2009
Hi Gary just joined the list I am in the UK ie 625, but the problems seem
much the same
The RCA digital servo was on TR61 TR70c and TCR 100
It was at its worst on TCR100 because it did not have THA ie the time base
could not centre itself by dumping into the servo
because of the twin decks
The pinch roller capstan worked providing the roller was OK they suffered
chemical changes and became sticky
and providing you could get the correct torque on the take up I think the
motor has to draw around an amp
The TR61 digital servo was not good far too tight and touchy if it hit
physical edits that we not perfectly timed
The 61 used to have reel problems if you ran out of control track the servo
would throw a loop and the floor mounted fan would suck in the tape
Took it up with RCA and they suggested reversing the air flow through the
fan so the tape would not be sucked in, just fell in a pile on the floor
Helpful people in Camden
I preferred the analogue servo if you could get the line lock module set up
correctly, but it was an art
Trevor Brown
-----Original Message-----
From: quadlist-bounces at quadvideotapegroup.com
[mailto:quadlist-bounces at quadvideotapegroup.com] On Behalf Of Gary Adams
Sent: 24 August 2009 15:31
To: 'Quad List'
Subject: Re: [QuadList] VR-1200B Daily Servo Set UP
The 70C had what we affectionately called the "Cart Machine Servo" which
used the same cards as the TCR-100. There was a TR-60C (I think) that had
the same servos in. Now that was scary. The cart machine was a 2 second
lock from a ready condition. But the TCR did not have a pinch roller and
the others did.
It is funny that Ted and I were talking about the servo and sc/h timing just
minutes before the flood of emails on the topic. I think Ted was wired.
Gary
-----Original Message-----
From: quadlist-bounces at quadvideotapegroup.com
[mailto:quadlist-bounces at quadvideotapegroup.com] On Behalf Of Guy Spiller
Sent: Sunday, August 23, 2009 8:18 PM
To: Quad List
Subject: Re: [QuadList] VR-1200B Daily Servo Set UP
These 70Cs will do 2 seconds or less, as well. As soon as the guide
pulls in, it locks so fast, it's scary!
The earlier 70s would do maybe 6 seconds dependably. The good news is
that the servos on all of them are absolutely stable and do not drift
with temperature at all.
Guy
uadvideotapegroup.com
_______________________________________________
Please trim posts to relevant info when replying!
Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegr
oup.com
More information about the QuadList
mailing list