[QuadList] Merlin vs stock Ampex

[C. Park Seward]

Hi Don,

I was looking to compare just the electronic section so the pictures were made in EE so as not to influence the result with tape and head issues.

Both machines have the "good" 4.5 MHz filter.

I don't know the frequencies of the packets but here is a sweep. It has no burst.


Best,
Park

C. Park Seward
Visit us: http://www.videopark.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC01343.jpg
Type: image/jpeg
Size: 177419 bytes
Desc: not available
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20091222/30e61018/attachment-0006.jpg>
-------------- next part --------------

DSC01343.JPG
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC01325.jpg
Type: image/jpeg
Size: 182741 bytes
Desc: not available
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20091222/30e61018/attachment-0007.jpg>
-------------- next part --------------

DSC01325.JPG
 




On Dec 22, 2009, at 4:21 PM, Don Norwood wrote:

> Hi Park:
> 
> More questions than answers....  What are the frequencies of the mutiburst packets?  Also, how are the measurements made (EE or playback)?  For some reason, 1328 has no color burst, so I'm not sure if the waveform is "valid" to compare to 1340.
> 
> The performance of the 1200 is related to which filter is installed in the signal system.  The best is 4.5 MHz, and the response should be virtually flat to that point.  Based on that, I'm guessing that this is not a "standard" multiburst with the top packet at 4.2 MHz.  But if the packets are higher frequencies, how are the higher frequencies getting past the filter?  A more revealing test is to use a 5 MHz sweep instead of multiburst.  In any event, for comparison, both machines need to have the same filters.
> 
> Then you get into what part of the system is doing what.  It's good to look at the output of the demods to be sure that they are both correct and identical, and then compare it to the output of the machine.  That way you establish whether differences are in the signal system or in the processing.
> 
> Don
> 
> ----- Original Message ----- From: "C. Park Seward"
> Subject: [QuadList] Merlin vs stock Ampex
> 
> 
>> Here are some pics I took of the two machines. Same test signals, same scope.
>> 
>> Can you guess which one is which?
>> 
>> 
> 
> 
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com