[QuadList] Electronic Editing Notes

[dcfwtx at aol.com]

Hello Guy,


Burbank had two 70C's in edit 3 (known as VTR 22 and 24). Same type RCA (EECO) programmer and GVG switcher as edit 2. Those edits were good too as with the B's. The problem we ran into was erratic playback servos breaking up for some (usually) unknown reason. They were fast lockup and were clean in terms of the signal system, but otherwise known to give us problems, especially in long-form closed caption sessions. If we were assigned edit 3, we were sure to have OT .


You are right: No capstan and drum servo drift adjustments on the RCA's other than whatever routine maintenance adjustments that were periodically made, as opposed to operator/editor attention to the VR 2000 servos (always being checked).



David





-----Original Message-----
From: Guy Spiller <quadruplex at verizon.net>
To: Quad List <quadlist at quadvideotapegroup.com>
Sent: Fri, Jan 29, 2010 6:25 pm
Subject: Re: [QuadList] Electronic Editing Notes


David, 
My experience agrees with yours.  Having done many edits back in the day on a 2000, TR-22s and 70s,  I also found the RCAs to be considerably more consistent as far as edit stability is concerned.  A note here:  all of the quad edits in my career were either done "punch and pray" or with an Editec.  I have never personally experienced a quad under editor control. 
The RCA servos also seemed to be much more stable...regardless of ambient temperatures, and didn't need constant fiddling with discriminators and such on your knees in front of the Intersync. 
A more stable servo would certainly help to explain the observed somewhat more reliable edit performance. 
I have not yet attempted any edits on these 70Cs, but it would be interesting to see if the edits are as consistently good as the earlier versions.  The C has much "tighter" servos. 
Anyone on the list have 70C editing experience they would care to relate? 
Guy 
 
dcfwtx at aol.com wrote: 
> Chris, 
> 
> In my experience with a tape facility with RCA and Ampex edit devises, > the RCA TR 70's made a more predictable edit in insert from a > stability standpoint than the VR 2000. They both thad their routines > and procedures for setup, and your success with the edit was generally > seen by the bounce of the Colortec/Amtec/stab dots. The RCA seemed to > always be a lot easier to get a real nice looking edit. Color framing > also seemed more predictable on the TR 70's. > 
> 
> David Crosthwait 
> DC Video 
> www.dcvideo.com 
> 
> 
> 
>   Guy Spiller 
 
email: quadruplex at verizon.net 
phone: (804) 379-2050 
website: www.GuySpiller.com 
Midlothian, VA 
 
_______________________________________________ 
Please trim posts to relevant info when replying! 
Send QuadList list posts to QuadList at quadvideotapegroup.com 
Your subscribe, unsubscribe and digest options are here: 
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20100129/7f442762/attachment-0005.html>