[QuadList] Splicers

Sat Jan 30 13:32:22 CST 2010

Chris,

Tnx fer info, I never saw one of those, it looks like the same setup as the CBS made ones, but not so aesthetically as pleasing.

Tnx,

GK

-----Original Message-----
From: chill315 at aol.com
To: quadlist at quadvideotapegroup.com
Sent: Sat, Jan 30, 2010 2:00 pm
Subject: Re: [QuadList] Splicers

Here is the link to the Smith Splicer that most of us used.  http://www.vtoldboys.com/editingmuseum/smith.htm

Chris Hill
WA8IGN

-----Original Message-----
From: georgenann at aol.com
To: quadlist at quadvideotapegroup.com
Sent: Sat, Jan 30, 2010 1:07 pm
Subject: [QuadList] Splicers

Hi Guys,

I see there some "old Time Splicers" still around.  Just curious, what kind of splicers did you use??  Who made them?

At CBS the splicers were made by CBS in the machine shop.  They were beautifully made.  They did the trick, even had the tape cutter at the precise angle.  Unfortunately they have all disappeared, (before I had a chance to nail one).  They were used with "Edivue Solution" which was freon and fine oxide dust which "Developed" the tape so as to expose the frame pulses.  Some of the guys were pretty good at splicing, I don't remember seeing any bad splices, although they were just about a thing of the past when I started in tape.

73,

George Keller

_______________________________________________
lease trim posts to relevant info when replying!
end QuadList list posts to QuadList at quadvideotapegroup.com
our subscribe, unsubscribe and digest options are here:
ttp://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20100130/080b9264/attachment-0005.html>