[QuadList] OT: And now-- your palm-sized, color, HD, Quad editing suite replacement

[Bill Carpenter]

Hey Tom,

I learned about helical scan servos in 1965, with the Ampex VR-7000, w/a belt driven scanner servo, and four months later, the entire engineering dept started a Final System Test line for a month, since we could build machines faster than we could test them. 
A new machine would get a mechanical "turn-on, smoke test", and then the servo would get set up, and then I would get to set up the video system.
We were having some vendor problems, so the engineer who was doing the servo set-up, taught me how to set up the servo, with a test tape, and my "thumb". This would let me  bypass his test position and get on with getting the video working which was what I really liked to do. 
When you were done everything, it was set up properly and when you check the sample and hold with a scope you didn't even have to re-center it on the ramp.
Two years later, and 8,000 miles away, at a Catholic mission, 50 miles outside of Manila, I helped a missionary priest, who had a scope, set up a VR-7000 servo after he had replaced the rubber belt. I put the scope aside, told him to watch for two minutes and then when it was working, I would take him back to the start and set it up "by the book" with the scope. 
It's very hard to teach people to use fingers to test mechanical items and some people are very heavy handed. 
When you get it right,  you will remember it forever!

Bill Carpenter




________________________________
From: Tom Evans <tom at tom-evans.com>
To: Quad List <quadlist at quadvideotapegroup.com>
Sent: Mon, June 7, 2010 8:46:05 PM
Subject: Re: [QuadList] OT: And now-- your palm-sized, color, HD, Quad editing  suite replacement

The xylene port is pretty obvious right on top, but I'm not sure where
they put the air compressor.

Anyone who has ever used a thumb to clear an on-the-air head clog
would appreciate an app where a thumb gesture would fix whatever ails
a picture.

-Tom


On Mon, Jun 7, 2010 at 9:28 PM, Ted Langdell <ted at quadvideotapegroup.com> wrote:
> Hi, Bill,
> Since this is a QuadList, I'd think the apps need to QUAD related:  Add
> scalloping (adjustable for whether you're trying to mimic the vacuum guide

_______________________________________________
Please trim posts to relevant info when replying!
Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20100607/4e1ceee2/attachment-0005.html>