[QuadList] Another AVR-2 on eBay

[Chill315 at aol.com]

This AVR-2 is one of the later versions.  A couple of things that I  
noticed.  The circuit breakers are factory installed.  These were  placed between 
the transformer and the bridge rectifiers of the power  supplies.  There is 
a breaker for each supply.  The other thing is  that this unit has the 
rubber bumpers on the rear of the deck.  I did not  have these on the serial 
number 900 series that I had.  I think this is one  of the units with the 
reinforced deck frame.  Another clue is that the unit  has the electronic tape 
timer.  There is also a hole for the air hose that  did not exist on early 
models.  
 
I would consider this a later unit and would have almost all the latest  
boards.  The biggest thing that I would worry about is the condition of the  
tape path.  Storage being in an outside unit with no climate control.   How 
bad is the corrosion of every roller, guide and head in the tape path.   That 
would be the expensive cost. 
 
Chris Hill
WA8IGN 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20100503/6979f60b/attachment-0005.html>