[QuadList] Smith splicer, etc.

[Don Norwood]

Hi Tom:

My experience is different.  Even when working in non-comercial facilities in the 70's, we had lots of LBM material, but it was almost all recorded at 15 ips.  All of the LBM tapes I've transferred in recent times have also been 15 ips.

Don
  ----- Original Message ----- 
  From: Tom Evans 
  To: Quad List 
  Sent: Thursday, October 14, 2010 4:16 PM
  Subject: Re: [QuadList] Smith splicer, etc.


  Bill,

  Most of the Low Band Mono tapes I recall were recorded with a 5 mil head (not the standard 10 mil head).  

  The digital TBCs of the AVR-2 and TR-600 generation were clocked by an oscillator locked to colorburst.  What happens when no colorburst is present?  Perhaps a VR-1200 with AMTEC could do better.

  -Tom Evans (with more questions than answers)




  On Thu, Oct 14, 2010 at 2:41 PM, <bill.spencer at northstarstudios.tv> wrote:

    All,



    I am working on a recovery project and have had a splice part on me.  If anyone knows of a Smith splicer or a 2” audio straight cut splicer in or near Nashville that I could borrow for a few days please let me know.



    Also, some of these tapes were recorded with improper deviation in LBM and the sync is low.  I can turn the demod level up so that the sync locks and then run the video through a proc amp to bring it back to normal, but it is still causing the MTBC in my TR-600 to have an excessive amount of jitter.  Does anyone know of some old tricks to make a TR-600 play LBM better?  Was there ever a LBM demod for the AVR-2 or has anyone successfully modified one?  I have two extras so I have something to experiment with.



    Tapping the well of all wisdom for all things quad, I thank you in advance.



    Bill Spencer

    RF Engineering Supervisor

    NorthStar Studios, Inc.

    3201 Dickerson Pike

    Nashville, TN 37207



    Phone 615.650.6000 ext. 6610

    Cell 615.445.5616

    Fax 615.650.6027

    email bill.spencer at northstarstudios.tv







------------------------------------------------------------------------------


  _______________________________________________
  Please trim posts to relevant info when replying!
  Send QuadList list posts to QuadList at quadvideotapegroup.com
  Your subscribe, unsubscribe and digest options are here:
  http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20101014/8bd33073/attachment-0004.html>