[QuadList] Smith splicer, etc.

[Don Norwood]

Bill:

I don't think there ever was an LBM demod for the AVR-2, although there are LBC AVR-2 board sets.  Many years ago (in the 70's) I used to run into this alot in the educational arena.  Tapes recorded on VR-1000 or VR-1100's that were not properly set up could easily make these kinds of tapes!  The good thing about the VR-1100 signal system is that while it can make incorrect recordings, it also is usually able to reproduce them properly without much trouble.  I still have one of them, but haven't run into tapes like that in a long time.

Don Norwood
Digitrak Communications, Inc.
www.digitrakcom.com

  ----- Original Message ----- 
  From: bill.spencer at northstarstudios.tv 
  To: QuadList at quadvideotapegroup.com 
  Sent: Thursday, October 14, 2010 3:41 PM
  Subject: [QuadList] Smith splicer, etc.


  All,

   

  I am working on a recovery project and have had a splice part on me.  If anyone knows of a Smith splicer or a 2" audio straight cut splicer in or near Nashville that I could borrow for a few days please let me know.

   

  Also, some of these tapes were recorded with improper deviation in LBM and the sync is low.  I can turn the demod level up so that the sync locks and then run the video through a proc amp to bring it back to normal, but it is still causing the MTBC in my TR-600 to have an excessive amount of jitter.  Does anyone know of some old tricks to make a TR-600 play LBM better?  Was there ever a LBM demod for the AVR-2 or has anyone successfully modified one?  I have two extras so I have something to experiment with.

   

  Tapping the well of all wisdom for all things quad, I thank you in advance.

   

  Bill Spencer

  RF Engineering Supervisor

  NorthStar Studios, Inc.

  3201 Dickerson Pike

  Nashville, TN 37207

   

  Phone 615.650.6000 ext. 6610

  Cell 615.445.5616

  Fax 615.650.6027

  email bill.spencer at northstarstudios.tv

   

  CONFIDENTIALITY NOTICE/HIPAA PRIVACY RULE: This message may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you are not the intended recipient (or authorized to act on behalf of the intended recipient) of this message, please do not disclose, forward, distribute, copy, or use this message or its contents. If you have received this communication in error, please notify us immediately by return e-mail and delete the original message from your e-mail system. Thank you.



------------------------------------------------------------------------------


  _______________________________________________
  Please trim posts to relevant info when replying!
  Send QuadList list posts to QuadList at quadvideotapegroup.com
  Your subscribe, unsubscribe and digest options are here:
  http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20101014/ae610cd7/attachment-0005.html>