[QuadList] VR2000 Question

[LARRY]

Hello Lee, 

It could be the ready relay in the transport control chassis, or possibly the time-delay circuit. 

That is my first impression. 

I may have a spare transport control and panel schemetic. 

I am sure there are several spare transport control chassis here if you find you need a part. 

Larry Odham 

Engr/Tech 

TAMIS Archive 

Knoxville, Tn. 
----- Original Message ----- 
From: "lee williams" <lasvegastvengineer at yahoo.com> 
To: "Quad List" <quadlist at quadvideotapegroup.com> 
Sent: Monday, August 8, 2011 5:36:01 PM 
Subject: [QuadList] VR2000 Question 




Got one for the guys who have worked on a VR2000. 

Has anybody ever seen on a 2000 were if you play a tape all the way to the end, the 2000's head and capstan motor won't shut off? 

IF I start the machine cold, I can thread a tape and hit play and stop and all works fine. 
After about 10 minutes, the head motor and capstan won't turn off short of killing the main switch. 

I have the READY switch taped off, so it's not that. 

If I turn on the ready switch, the head goes slightly faster so something is leaking. 

Was wondering if it could be one of the relays behind the control panel hanging on, but don't have the schematics for that circuit. 

Any suggestions? 

Thanks 

Lee 


_______________________________________________ 
Please trim posts to relevant info when replying! 
Send QuadList list posts to QuadList at quadvideotapegroup.com 
Your subscribe, unsubscribe and digest options are here: 
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110808/bd3c0aba/attachment-0005.html>