[QuadList] VR-2000 Still spinning

[lee williams]

Hay Chris, 
 
Have not checked the 135 volt power supply. 
Did have it removed when I changed out the circuit breaker. 
 
Will check it out tonight. 
Thanks 
Lee 

--- On Fri, 8/12/11, Chill315 at aol.com <Chill315 at aol.com> wrote:


From: Chill315 at aol.com <Chill315 at aol.com>
Subject: [QuadList] VR-2000 Still spinning
To: quadlist at quadvideotapegroup.com
Date: Friday, August 12, 2011, 7:29 AM



I looked at a few things.  
 
First there is a replay in the 135 volt supply that is activated by the READY control line.  That could be sticking.
 
I still have to get my head around how the control is done to start the motors turning.  There are places in the Intersync that have ready buss control lines.  Not very many though.
 
The training manual does not address the issue of how to tell the heads to spin.  
 
I still think it is in the relays somewhere.
 
Chris Hill
-----Inline Attachment Follows-----


_______________________________________________
Please trim posts to relevant info when replying!
Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110812/a55b95ae/attachment-0005.html>