[QuadList] Sugestions on how to clean sappers.

[lee williams]

Thanks for the suggestion Park, 
 
I am currently using alcohol and cleaning wipes. 
They work OK for glue on the edges, but alcohol will also cut the chemical that is used to keep the tape from naturally sticking to itself. 
 
When you get sap that has penetrated in to the wrap, the tape wants to stick together. If I get too much of the separator is missing, the tape will stop or break. 
 
Somebody told me that the separator is something close to boiled Castor Oil. 
I can get Castor Oil at Wal-Mart, but I have been hesitant to actually try it because I don't want to risk a good head on a unknown chemical. 
 
Ideally, I need something that will cut the sap but leave the tape and the separator alone. 
 
Thanks 
Lee 


________________________________
From: C. Park Seward <park at videopark.com>
To: Quad List <quadlist at quadvideotapegroup.com> 
Sent: Tuesday, December 20, 2011 8:59 AM
Subject: Re: [QuadList] Sugestions on how to clean sappers.

Thanks for all the good information. 

I have to agree about Xylene. A little aggressive for my tastes for cleaning glue, unless I get to a really bad spot.  However, I do use it exclusively when cleaning transports. 

To clean off the glue, I use alcohol and a Q-tip. It takes some time but will get the glue off. I then clean the tape with multiple passes with Pellon cloth and clean the machine after each pass since the guides scrape off any remaining glue.

Goof Off and Goo Gone may work too. But I must try the Eucalyptus. Sounds like a great solution. I will have at least 20 more reels to clean. 

Best,
Park

C. Park Seward
Cell: 818-535-2747
Home: 541-476-6657
2" Quad and 1" "C" transfers
The Transfer Lab at Video Park
Visit us: http://www.videopark.com


On Dec 19, 2011, at 9:15 PM, Chill315 at aol.com wrote:
I would not use xzylene.  I have used it to remove oxide from tape.  You might do more damage then good.Chris Hill
>On Dec 19, 2011, at 9:47 PM, Glenn Gundlach <stratus46 at yahoo.com> wrote:
>I will be labeled a heretic. I used a Q-tip and (gasp) Xylene. Dave K  mentioned naptha which I haven't tried. Would Acetone do the trick? The Xylene has the virtue of leaving no residue of its own but I don't know about the other solvents. I don't think you'd want anything oily though it would loosen the sticky stuff.
>>
>>
>>G²
>>
>>--- On Mon, 12/19/11, lee williams <lasvegastvengineer at yahoo.com> wrote:
>>
>>
>>>From: lee williams <lasvegastvengineer at yahoo.com>
>>>Subject: [QuadList] Sugestions on how to clean sappers.
>>>To: "Quad List" <quadlist at quadvideotapegroup.com>
>>>Date: Monday, December 19, 2011, 11:48 AM
>>>
>>>
>>>Hay Everybody, 
>>>
>>>Does anybody have any suggestions on cleaning sappy 2" Scotch tapes? 
>>>
>>>Got several hundred tapes that were stored in a storage locker for several years without air conditioning. 
>>>A lot of tapes were stored on there sides and the glue has seeped through to the back reels of the tape. 
>>>
>>>Any suggestions as to what will cut through the sap without destroying the tape? 
>>>
>>>Thanks and withing all a Happy Holiday. 
>>>
>>>Lee  
>>>
>>>
>>> 
>>>
>>>
>>>Visit Your Group 
>>>MARKETPLACE
>>>Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now. 
>>> 
>>>Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use
>>>. 
>>>
>>>__,_._,__________________________________________________Please trim posts to relevant info when replying!Send QuadList list posts to QuadList at quadvideotapegroup.comYour subscribe, unsubscribe and digest options are here:http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
>>>-----Inline Attachment Follows-----
>>>
>>>
>>>_______________________________________________Please trim posts to relevant info when replying!Send QuadList list posts to QuadList at quadvideotapegroup.comYour subscribe, unsubscribe and digest options are here:http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com 
>_______________________________________________Please trim posts to relevant info when replying!Send QuadList list posts to QuadList at quadvideotapegroup.comYour subscribe, unsubscribe and digest options are here:http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com_______________________________________________
>Please trim posts to relevant info when replying!
>Send QuadList list posts to QuadList at quadvideotapegroup.com
>Your subscribe, unsubscribe and digest options are here:
>http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com_______________________________________________Please trim posts to relevant info when replying!Send QuadList list posts to QuadList at quadvideotapegroup.comYour subscribe, unsubscribe and digest options are here:http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20111220/582fc59a/attachment-0004.html>