[QuadList] Sugestions on how to clean sappers.
C. Park Seward
park at videopark.com
Tue Dec 20 10:59:50 CST 2011
Thanks for all the good information.
I have to agree about Xylene. A little aggressive for my tastes for cleaning glue, unless I get to a really bad spot. However, I do use it exclusively when cleaning transports.
To clean off the glue, I use alcohol and a Q-tip. It takes some time but will get the glue off. I then clean the tape with multiple passes with Pellon cloth and clean the machine after each pass since the guides scrape off any remaining glue.
Goof Off and Goo Gone may work too. But I must try the Eucalyptus. Sounds like a great solution. I will have at least 20 more reels to clean.
Best,
Park
C. Park Seward
Cell: 818-535-2747
Home: 541-476-6657
2" Quad and 1" "C" transfers
The Transfer Lab at Video Park
Visit us: http://www.videopark.com
On Dec 19, 2011, at 9:15 PM, Chill315 at aol.com wrote:
> I would not use xzylene. I have used it to remove oxide from tape. You might do more damage then good.
>
> Chris Hill
>
> On Dec 19, 2011, at 9:47 PM, Glenn Gundlach <stratus46 at yahoo.com> wrote:
>
>> I will be labeled a heretic. I used a Q-tip and (gasp) Xylene. Dave K mentioned naptha which I haven't tried. Would Acetone do the trick? The Xylene has the virtue of leaving no residue of its own but I don't know about the other solvents. I don't think you'd want anything oily though it would loosen the sticky stuff.
>>
>>
>>
>> G²
>>
>>
>> --- On Mon, 12/19/11, lee williams <lasvegastvengineer at yahoo.com> wrote:
>>
>> From: lee williams <lasvegastvengineer at yahoo.com>
>> Subject: [QuadList] Sugestions on how to clean sappers.
>> To: "Quad List" <quadlist at quadvideotapegroup.com>
>> Date: Monday, December 19, 2011, 11:48 AM
>>
>> Hay Everybody,
>>
>> Does anybody have any suggestions on cleaning sappy 2" Scotch tapes?
>>
>> Got several hundred tapes that were stored in a storage locker for several years without air conditioning.
>> A lot of tapes were stored on there sides and the glue has seeped through to the back reels of the tape.
>>
>> Any suggestions as to what will cut through the sap without destroying the tape?
>>
>> Thanks and withing all a Happy Holiday.
>>
>> Lee
>>
>>
>>
>>
>> Visit Your Group
>> MARKETPLACE
>> Stay on top of your group activity without leaving the page you're on - Get the Yahoo! Toolbar now.
>>
>> Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use
>> .
>>
>> __,_._,___
>>
>> _______________________________________________
>> Please trim posts to relevant info when replying!
>> Send QuadList list posts to QuadList at quadvideotapegroup.com
>> Your subscribe, unsubscribe and digest options are here:
>> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
>>
>>
>> -----Inline Attachment Follows-----
>>
>> _______________________________________________
>> Please trim posts to relevant info when replying!
>> Send QuadList list posts to QuadList at quadvideotapegroup.com
>> Your subscribe, unsubscribe and digest options are here:
>> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
>> _______________________________________________
>> Please trim posts to relevant info when replying!
>> Send QuadList list posts to QuadList at quadvideotapegroup.com
>> Your subscribe, unsubscribe and digest options are here:
>> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20111220/fa47b8ad/attachment-0005.html>
More information about the QuadList
mailing list