[QuadList] Question of the week
Bill Carpenter
wcarpen107 at yahoo.com
Mon Feb 28 11:09:37 CST 2011
Hi Don,
Yes, the Al Trost signal system from the AVR-2, was repackaged by Maurice and added to the DTBC, which had a 45 degree sloping mount on top to accept the VR-3000B.
I believe the system was shown at Montreaux in 75?
Bill Carpenter
Bye for now, love to all, Bill & Gewyn & Ginger (whoof...whoof)
--- On Mon, 2/28/11, Don Norwood <dwnorwood at embarqmail.com> wrote:
From: Don Norwood <dwnorwood at embarqmail.com>
Subject: Re: [QuadList] Question of the week
To: "Quad List" <quadlist at quadvideotapegroup.com>
Date: Monday, February 28, 2011, 9:01 AM
Bill:
Thanks as always for your informative post! I don't have any "B"
version 3000's, but I do have a manual for the B and always wondered, since the
head signals were available, did the Ampex package use external
switching, demod, etc before the TBC, or was the video out of the 3000 fed
directly to the TBC-900? It seems like the only way to get "AVR-2
performance" would be to have an external signal system, but if so, was that
another box or was it packaged with the TBC-900?
Don Norwood
Digitrak Communications, Inc.
www.digitrakcom.com
----- Original Message -----
From:
Bill
Carpenter
Hi Folks,
The VR -3000B did not have a plug-in
DTBC, it used a TBC 900, which was also the base for the unit, when
playing back to air.
I gave a SMPTE paper and showed the system @
The Winter TV Conference in Detriot in early 76, which many called the
birthplace of ENG.
The machine had a dual track audio system,
with the electronics above the top plate on the left edge.
The
system, the VR-3000/TBC-900 was a joint venture between Al Trost &
Maurice Lemoine to produce what was wanted in France. Additional
connectors were added to bring the video head signals out to external
processing and the goal was AVR-2 playback performance.
The
goal was to use the VR-3000 in the field and then at a mobile
"base station" use the TBC-900, to feed a high quality signal back via
microwave to be broadcast without further processing.
Bill
Carpenter
-----Inline Attachment Follows-----
_______________________________________________
Please trim posts to relevant info when replying!
Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110228/37811b4d/attachment-0005.html>
More information about the QuadList
mailing list