[QuadList] Ampex Models

[David Crosthwait]

Well,

Paul Beck has a complete TCR and I have two ACRs in storage (way in the back). It could happen...but don't hold your breath! I also have a top ACR maintenance engineer on standby in Arizona to bribe for help.


David



On Mar 1, 2011, at 12:41 PM, Gary Adams wrote:

> It was a financial compromise.  We probably saved $100K or more on the purchase which is significant for small market facilities.  When we came up with the multiple 10 second thing, we would simply edit the two together using the built in (optional) editor.  Was automatic and fast.  Not elegant but got us by. 
>  
> I was always able to convince the technical staff it would be easier to repair the TCR since a “tractor mechanic” could probably figure most of the mechanics out.  And I didn’t mean that in a negative way.  The mechanics were simple and the 7 steps to thread and unthread were all visible during the process.  As much as I would have wanted the ACR, I was able to make the TCR very reliable.  We should set the ACR and TCR up together for a demonstration.  It would not be a cheap investment.  It would be nice to see once again before some of us (included) are gone.
>  
> Gary
>  
> From: quadlist-bounces at quadvideotapegroup.com [mailto:quadlist-bounces at quadvideotapegroup.com] On Behalf Of Trevor Brown
> Sent: Tuesday, March 01, 2011 2:34 PM
> To: 'Quad List'
> Subject: Re: [QuadList] Ampex Models
>  
> I too remember the TC100 rules short carts only first or last in the break
> We also had special half park switches on our TCR100’s to arrest the thread cycle to help with short carts
> But 10” would still not have been possible other than as stated beginning or end of break
>  
> TrevorB
> UK Member
>  
>  
> From: quadlist-bounces at quadvideotapegroup.com [mailto:quadlist-bounces at quadvideotapegroup.com] On Behalf Of Thomas, Stephen D
> Sent: 01 March 2011 18:24
> To: Quad List
> Subject: Re: [QuadList] Ampex Models
>  
> I remember having to explain to a director in 1985 why the 10 second ID had to be at the end of a multi-spot break when played on an RCA TCR-100.  This wouldn’t have been an issue with the Ampex ACR.
>  
> In college in 1975, our local studio became the proud owner of our first quad.  It was a VR-1000B purchased from a military surplus warehouse.  I still have the original instruction manual.  I think the studio lights dimmed a little when the thing was first fired up in the morning.  Many months were spent replacing tubes, obtaining heads and adjusting tension before an acceptable monochrome picture was achieved.  It was quite an education for this student (who grew up on 1” helical and then ¾” U-matic VTRs) to learn about head guides, tip penetration, Intersync and proc amps. 
>  
> Although I haven’t been physically close to a quad since my current station gave away our last VR-2000 about 15 years ago, I have a great respect for all who worked on them and kept them running for the benefit of future generations.   Thank you, group members, who keep history alive.
>  
> STEVE THOMAS
> SENIOR EDITOR and TECHNICAL DIRECTOR
> 248.351.7905
> e-mail:  sdthomas at cbs.com
>  
> "If your grammar is incorrect, then you’re in need of help"
> From: quadlist-bounces at quadvideotapegroup.com [mailto:quadlist-bounces at quadvideotapegroup.com] On Behalf Of David Crosthwait
> Sent: Tuesday, March 01, 2011 12:40 PM
> To: garyada at ix.netcom.com; Quad List
> Subject: Re: [QuadList] Ampex Models
>  
> In my opinion, there is nothing quite impressive than watching a station break with back-to-back 10 second promos being played on A, then B playing while A ejects, threads up, and almost immediately plays A again when B is done, etc. This theoretically can occur to a carousel full (24) of 10 second spots if the ACR is told to do so. Of course, in this mode, the spots have to be rewound or cued up later, but that's not a problem. It is a flawless transition from deck A to B and back to A again etc.
>  
>  
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110301/55a424d4/attachment-0004.html>