[QuadList] Another Switcher Picture Puzzle

[Chill315 at aol.com]

Don
 
There was a lot that was done by other folks for RCA.  The monitors  were 
made by Conrac and others.  The TO-4 scopes were made by someone  else.  In 
the areas of cameras, pedestals were made by others.  The  Film projectors 
were usually RCA but they did use Gray, Kodak, and other  projector makers.  
The cheaper educational stuff was made by others a  lot.  The encoders, 
racks, and patch panels, internal power  supplies, etc.  
 
So it was like any other manufacture, a lot was made for them.  They  did 
the integration for you.  Or the parts were used in a bigger  item.  
 
Chris Hill
WA8IGN
 
 
In a message dated 3/25/2011 10:17:53 A.M. Eastern Daylight Time,  
dwnorwood at embarqmail.com writes:

Chris covered everything!  Excellent  answer.
 
I actually thought 2 things were unusual.  The  non-composite that he 
mentioned, and the fact that RCA used a Ball Brothers  SEG in the switcher.  How 
often did they incorporate something from  another manufacturer in their 
products?
 
Here's the first page of the catalog.
 


----- Original Message ----- 
From:  _Chill315 at aol.com_ (mailto:Chill315 at aol.com)  
To: _quadlist at quadvideotapegroup.com_ 
(mailto:quadlist at quadvideotapegroup.com)   
Sent: Friday, March 25, 2011 8:20  AM
Subject: Re: [QuadList] Another  Switcher Picture Puzzle


What gave it away is the style of the mix handle.  RCA all the  way.
 
It is a RCA PTS-1 Switcher model 8/6D
 
RCA sold this in the educational market.  They called it  Professional 
equipment.  
 
It is a Ball effects panel at the top right.
 
What is unusual is that the switcher is a non-composite switcher.   The top 
A B buss were the mix effects that fed the wipe and key  generator.  The 
upper right panel did the control of that buss.
 
The output was fed to the MIX only buss in the center.  The delay  was 
matched so that you could dissolve in a key or wipe.
 
Lastly, the busses fed the COMPOSITE switches at the lower right.   Here 
would be the early quad machine or helical that was not locked to  house or 
the network feed.  
 
RCA built this from little modules that were jumped together with  little 
cables that had phono connectors at each end.  These would fit  on a 1 RU 
tray with three modules per tray.  
 
Chris Hill
WA8IGN
 
 
In a message dated 3/24/2011 11:57:18 P.M. Eastern Daylight Time,  
dwnorwood at embarqmail.com writes:

David's pic of the TE-60 reminded me of a system that I  thought was 
interesting because of an uncharacteristic design feature for  the manufacturer, 
and maybe a bit more difficult to identify.  It was  definitely quad era, and 
I've seen one feeding a VR-1100.
 
1) Who made this switcher
2) What was the model number
3) What's unusual about it










_______________________________________________
Please  trim posts to relevant info when replying!
Send QuadList list posts to  QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest  options are  here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegr
oup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110325/b3b7d55b/attachment-0004.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: RCAPTS-1sml2c.jpg
Type: image/jpeg
Size: 236909 bytes
Desc: not available
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110325/b3b7d55b/attachment-0002.jpg>