[QuadList] Tape Delay Systems

[Bill Carpenter]

Hi Folks,

I think the best engineered and best looking delay was produced by a San Francisco VHF station (I think it may have been a Westinghouse station?) where they used a pair of AVR-3's and cut a slot in the frame and the right side panel of the record machine and the left side of the play machine. 

The machines were anchored and mechanically connected and the tape exited the record machine went around a roller guide (Idler) and then went up to the high ceiling and then across a couple of feet to the proper spot above the play machine and then back down to a similar roller guide where the tape made the 90 degree turn into the supply side of the play machine. The roller guides were used at each tape turn point. It was a precision designed system and worked well.

I believe the goal was a 7-10 second delay for a live street interview that came in by microwave every weekday in the late afternoon.
The controls for the two machines were integrated using the extensive remote editor controls that were part of the AVR-3's

I explained this system to Dave Rodahl (reel servo designer) and Al Trost (VPR-3 Project Engineer) in 1982 and we proved that the VPR-3's could be easily used as a similar tape delay system. I don't know it anyone ever tried it, but I knew it would work.

 
Bye for now, Bill & Gewyn & Ginger (whoof...whoof)


________________________________
 From: Tony Quinn <tony at tqvideo.co.uk>
To: quadlist at quadvideotapegroup.com 
Sent: Saturday, April 14, 2012 7:33 PM
Subject: Re: [QuadList] Quad mystery photo quiz of the week
 
In message <F6BA545D-47E5-411B-B6AE-ACB4DF59A089 at dcvideo.com>, David 
Crosthwait <david at dcvideo.com> writes
>Hi Bill,
>
>That's an interesting Compact Video story about that VR-3000/VR-1000
>setup. Wish I could have seen it. Unfortunately that is not the machine
>in the picture. The answer is coming tonight. It does remind me of a
>story I was told last weekend over dinner by a friend who used to work
>at WJZ channel 13 in Baltimore. He told me they had a tape delay rig
>that recorded on a VR-1000 flat top feeding tape vertically to a
>VR-1200. I would have loved to have seen that in operation!

Well before my time, but

http://www.vtoldboys.com/hotline.htm
-- 
"Remember how stupid the average person is, then realize that half of them are
stupider than that.  - G. Carlin"

Please trim posts to relevant info when replying.

Change subject to reflect thread direction. Thanks.
_______________________________________________

Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20120414/4f4adc97/attachment-0005.html>