[QuadList] PAL-M playback on AVR-2 in UK--

[Don Norwood]

Ted:

I have no personal experience with this, but Ampex did make a PAL-M version of the AVR-2.  If the individual is asking how to convert an existing PAL machine to PAL-M, then according to the manual, there are 7 modules required.  #20, 28 & 30 are exclusively PAL-M.  In addition, modules #2, 12, 16 & 22 are combination NTSC/PAL-M and are also required.  Since module #12 is the modulator, if only playback is desired, then I assume that it could be eliminated from the list.

Don Norwood
Digitrak Communications, Inc.
www.digitrakcom.com
  ----- Original Message ----- 
  From: Ted Langdell 

------------------------------------------------------------------------------


  An e-mail from the UK arrived in my mailbox just a few ago.  Ian writes:


  Hi,

  Any idea how you could playback a PAL-M recording on an Ampex AVR-2.?


  The AVR-2 is a PAL/625 at 5.5MHz machine where the PAL -M recordings format is 525/PAL at 4.42MHz

  Any info  would be much appreciated?

  Kind Regards,


  Ian


  You can post replies to the list.  I'll send an e-mail with your answers to Ian.  I've invited him to subscribe.


  Ted
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20120207/0a0bb7c1/attachment-0005.html>