[QuadList] What's wrong with this ad contest

[chill315 at aol.com]

The servo lock light is not lit.  But I did not count that as it was the wrong control panel.  The reels are blurred but to the possibility of long exposure, that can not be counted.

Chris Hill

On Feb 29, 2012, at 10:51 PM, "Don Norwood" <dwnorwood at embarqmail.com> wrote:

> Hi Chris:
> 
> Ah.....I missed the tracking meter, but you've missed another really funny one!  That means there are at least 4 problems.
> 
> As for the waveform monitor, it's hard to see in the scan, but it is actually turned off.  I didn't count that one because you could run the machine that way.
> 
> I'm not sure about the doors either.  The one on the right would have stayed, but not certain about the left side.  I have an upgraded 1100, but it's not a "factory kit", so I can't go by it.
> 
> Don Norwood
> Digitrak Communications, Inc.
> www.digitrakcom.com
> 
> ----- Original Message ----- From: <chill315 at aol.com>
> 
> 
>> There is the monitor that is a Conrac black and white.  That was easy because they tell you
>> 
>> The first thing is the lack of the control panel upgrade for Intersync. It has the control switch for servo mode and a few other switches.
>> 
>> Next is the lack of RF on the tracking meter.
>> 
>> We can not count the lack of a display on the 527 because it could have been washed out by lighting.
>> 
>> I believe that another error is the doors shown.  But that is not a definitive one due to not knowing if they changed the doors or they were dropped in the kit.
>> 
>> 
> 
> 
> Please trim posts to relevant info when replying.
> 
> Change subject to reflect thread direction. Thanks.
> _______________________________________________
> 
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com