[QuadList] PTL Club--Quad duplication 1974-78--What do you know?

[Bill Carpenter]

Hi Folks,
Everything was right until you said the transfer took place under "heat & pressure" which is wrong, the tape passed thru a vaccum clamp to eliminate slippage between the high energy MIM tape and the copy tape while they passed thru a magnetic field, which caused the magnetic transfer. The clamp looked like a big, maybe 7-8" dia. capstan with a movable cover over 1/2 the diameter. This was the wear item on the system and I had to keep a system and an AVR-1 available to support EUE & NET with replacement transfer assemblies.
There was a try at making a helical duplicator using the thermal process, where you heated the tape to the "currie" point and made a contact transfer. This was done by Consolidated Video Systems, the first folks with a digital TBC for helical. They needed this to make a good master on Helical recordings, and the rest is history.  Bye for now, Bill Carpenter
 


________________________________
 From: Dave Satin <davesatin at aol.com>
To: Quad List <quadlist at quadvideotapegroup.com> 
Sent: Tuesday, July 2, 2013 4:28 AM
Subject: Re: [QuadList] PTL Club--Quad duplication 1974-78--What do you know?
 


Actually the nexus for high speed quad duplication was in New York, at EUE/Screen Gems. I worked in the videotape department in the late 1970s and early 1980s. High Speed was located on the 4th floor,across the corridor from the tape room that serviced the soap operas which were shot on the 6th floor. 
The first step in high speed quad dubbing was to create a Mirror Image Master or MIM, which was done on a modified AVR 1 that recorded on metal tape and ran backwards. That is to say that the supply reel was located on the right, the take up was on the left, and used a modified mark X head assembly, with a head wheel that ran counter clockwise. We would wind the metal tape onto Pyrex glass reels because the degausser, which was designed and built in house was so powerful, that magnetic induction would cause the aluminum reels to melt. 
MIMs were created in real
 time, by dubbing. After the MIM was done, it was threaded onto the high speed duplicator which had 5 or 6 slave tape transports. The high speed duplicator printed the tracks from the master to the slaves with a combination of heat and pressure and would run a 30 minute show in 6 minutes.
The MIM systems (we had 2 of them) were installed to service the syndication department, and 
we duplicated Match Game, Barney Miller, and many other shows that were syndicated by King World and other program syndicators. The finished dubs would go out and be by bicycled from station to station, and eventually return to the tape department where every tape was a mystery.
We would dub the shows on to new Scotch and Fuji tape and we would get back a mush mosh of old tape, tapes with splices, Memorex, and god knows what else. We would send out full reels and find that certain stations would cut off any extra tape on the reel after the shows final fade to black and
 use it themselves.....And I don't want to even talk about the pornos!
Wow thanks for shaking up some old fond memories

Dave Satin
Sent from my iPad5



______________________________________________
Please trim posts to relevant info when replying.

Change subject to reflect thread direction. Thanks.
_______________________________________________

Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20130702/95edfaee/attachment-0005.html>