[QuadList] AMPEX VR-5100 WILL IT PLAY OTHER MACHNESTYPE A TAP...

[Dave Sieg]

Any tape made on an IVC 1" machine will definitely not play on an Ampex
5100...
completely different format, head drum size, #heads, tape speed, etc etc
etc.


On Fri, May 16, 2014 at 3:20 PM, <COURYHOUSE at aol.com> wrote:

>
>
>  Don  -  Well if  we never getting it  working that is ok too as  we have
> an  Ampex camera that is a nice  match for it...  the  TelePrompTer   1
> inch  tape   was  supposedly done    on a IVC  so we  will try that.
> If it  works that is  great as we  have no budget for outside services
>  to  convert it! So  fingers are  crossed!
> Ed#
>
>
>  In a message dated 5/16/2014 11:41:05 A.M. Mountain Standard Time,
> dwnorwood at digitrakcom.com writes:
>
>
>
>
> I agree with many of the comments on this thread, and to be sure, the
> answer to Ed's question comes with many qualifiers.  The primary reason
> that we use VPR-7900's for recovery of Type-A tapes is their ability to
> handle all three variants of the format's carrier frequencies.  I believe
> the 5100 is low band only which was intended only for black and white, but
> since the Ampex format was direct record, you can still recover color from
> the lowband tapes if they contain color material.  Obviously not the best
> situation, but possible.  Tapes recorded in hi-band or very-high-band will
> not reproduce properly on a low-band machine.
>
> Regarding interchange, there's no doubt that the movable guides were a bad
> design.  However, our experience has shown that many of the interchange
> problems were the result of incorrect adjustment of the machines more often
> than "naturally occurring" changes in the guide path.  Because this was
> originally a "non-broadcast" format, much of its use was in educational or
> industrial applications, and generally with un-trained operators.  My
> favorite example was a tape we received from a large university.  It begins
> with no video, but on the audio track, you hear "Hey Bill, how do you work
> this thing?".  Then the machine was obviously stopped, and when it was
> re-started, there was video, recorded with a setup level of about 70%!
>
> The challenges of recovering Type-A tapes can be significant, and we have
> even done custom modifications when required for special problems if the
> budget was available.  When the tapes are good, the quality, especially
> from the VHB tapes can be excellent, but that is certainly the exception
> rather than the rule.  Bottom line is, we're talking about a format
> developed in the mid 60's, and a lot has changed since then!
>
> Don Norwood
> Digitrak Communications, Inc.
> www.digitrakcom.com
>
>
> ______________________________________________
> Please trim posts to relevant info when replying.
>
> Change subject to reflect thread direction. Thanks.
> _______________________________________________
>
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
>
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
>
>
> ______________________________________________
> Please trim posts to relevant info when replying.
>
> Change subject to reflect thread direction. Thanks.
> _______________________________________________
>
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
>
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
>



-- 
Dave Sieg
www.linkedin.com/in/davesieg
www.davesieg.com
www.scanimate. <http://www.scanimate.net>com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20140516/0172a60e/attachment-0005.html>