[QuadList] VR2000 large round control button lamp replacement

[Dave Sieg]

If you're talking about the buttons I recall, the round white plastic
backlit buttons
that fit into a dark grey cup which holds the switch mechanism,
I've always just pulled the white plastic button straight out.
Sometimes tricky to get the bulb base to slide out of the metal center
piece.

I've also seen the white plastic crack where it was molded around the metal
center piece,
so be careful to only pull straight out!

On Fri, May 15, 2015 at 12:24 PM, Griffin, Buddy via QuadList <
quadlist at quadvideotapegroup.com> wrote:

>
>
>
> ---------- Forwarded message ----------
> From: "Griffin, Buddy" <bgriffin at commeng.com>
> To: "quadlist at quadvideotapegroup.com" <quadlist at quadvideotapegroup.com>
> Cc:
> Date: Fri, 15 May 2015 16:24:12 +0000
> Subject: VR2000 large round control button lamp replacement
>
> I would appreciate it if anyone can suggest a foolproof technique to
> remove the large round stop, play, rewind, etc. control plastic buttons on
> a VR2000B to change the lamps. I want to be careful not to damage them as
> it will be hard to find replacements.
>
>
>
> Sincerely,
>
>
>
> Buddy Griffin
>
> ______________________________________________
> Please trim posts to relevant info when replying.
>
> Change subject to reflect thread direction. Thanks.
> _______________________________________________
>
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
>
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
>



-- 
Dave Sieg
www.zfx.com
www.linkedin.com/in/davesieg
www.davesieg.com
www.scanimate. <http://www.scanimate.net>com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20150515/718d6dc6/attachment-0005.html>