<font color='black' size='2' face='arial'><WBR>The earliest Ampex heads use a crystal plate with copper on either side.&nbsp;Applying voltage across the&nbsp;two plates flexed the crystal, which caused it to move&nbsp; the head up and down in an arc, as someone has said.&nbsp; In later versions, they cut the copper plates near the tip and cross connected&nbsp;the plates at the tip&nbsp;with the&nbsp;plates on the body.&nbsp; This meant that a voltage that would deflect the head up, would deflect the end of the bimorph down, which more or less caused it to move parallel to the tape.&nbsp;<br>
&nbsp;&nbsp;&nbsp; Both versions of the head required high voltages applied through brushes to make it work.&nbsp; The early scanners used carbon rod brush assemblies that shed carbon dust and experienced many shorts.&nbsp;&nbsp; They tried changing the order of the brushes so that adjacent brushes&nbsp;did carry&nbsp;not opposite polarity voltages and various other schemes. Nothing worked, the brush assemblies were noisy and shorted out, the brushes broke, etc.&nbsp; Finally they threw in the towel and used wire brushes like Sony and greatly improved the operation and reliability of the AST.&nbsp; Sony had their heads on a parallelogram, which kept it parallel to the tape without all the fuss of the double bimorph.<br>


<div style="CLEAR: both"></div>


<div>Bob Bruner</div>


<div>W9TAJ<br>
<br>
</div>
</font>