[QuadList] Ampex Mark Ten 10 mil head

[chill315 at aol.com]

Ball Bearing heads were used for years on the early machines.  I had no problem with them on the TRT-1 that I had.  It can have more error then an air bearing.  There is a sensor on the deck of the 1200 and other machines that will tell the machine that it has ball bearing head installed.  It would be interesting to see how bad the AMTEC error would be in this case.  Has anyone ever used a ball bearing head on the later machines?

Chris Hill
WA8IGN



-----Original Message-----
From: Don Norwood <dwnorwood at embarqmail.com>
To: sgejwalton at earthlink.net; Quad List <quadlist at quadvideotapegroup.com>
Sent: Mon, Nov 30, 2009 4:17 pm
Subject: Re: [QuadList] Ampex Mark Ten 10 mil head


Be aware that this is a BALL Bearing head, NOT AN AIR BEARING. It is 10 mil according to the part number. 
 
I see that the link to the specs goes to a page on my website, but I do not know the seller or anything else about this head. 
 
Don 
Digitrak Communications, Inc. 
www.digitrakcom.com 
 
----- Original Message ----- From: sgejwalton 
To: QuadList 
Sent: Monday, November 30, 2009 11:19 AM 
Subject: [QuadList] Ampex Mark Ten 10 mil head 
 
There is a second Ampex Mark Ten head on e-bay. Item number 400088699558, presumably 10 mil, since it does not have a "5 mil" sticker on it. 
 
Steve Walton 
 
 
_______________________________________________ 
Please trim posts to relevant info when replying! 
Send QuadList list posts to QuadList at quadvideotapegroup.com 
Your subscribe, unsubscribe and digest options are here: 
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20091130/8054030a/attachment-0004.html>