[QuadList] Ampex Mark Ten 10 mil head

Don Norwood dwnorwood at embarqmail.com
Mon Nov 30 15:39:18 CST 2009


Hi Chris:

Yes, I have.  The results vary.  I have a Videomax BB rebuild that is almost as good as an Air Bearing.  The worst I've had was an Ampex, but still well within the correction range although I don't recall the exact amount of error.  Understandably, they can also get worse with age.

The VR-3000 uses only BB heads, and the quality of the recordings can be quite good.  I currently have a MK-11 head installed that doesn't sound good at all, but the performance is fine.

Don 
Digitrak Communications, Inc.
www.digitrakcom.com
  ----- Original Message ----- 
  From: chill315 at aol.com 
  To: quadlist at quadvideotapegroup.com 
  Sent: Monday, November 30, 2009 4:24 PM
  Subject: Re: [QuadList] Ampex Mark Ten 10 mil head


  Ball Bearing heads were used for years on the early machines.  I had no problem with them on the TRT-1 that I had.  It can have more error then an air bearing.  There is a sensor on the deck of the 1200 and other machines that will tell the machine that it has ball bearing head installed.  It would be interesting to see how bad the AMTEC error would be in this case.  Has anyone ever used a ball bearing head on the later machines?

  Chris Hill
  WA8IGN



  -----Original Message-----
  From: Don Norwood <dwnorwood at embarqmail.com>
  To: sgejwalton at earthlink.net; Quad List <quadlist at quadvideotapegroup.com>
  Sent: Mon, Nov 30, 2009 4:17 pm
  Subject: Re: [QuadList] Ampex Mark Ten 10 mil head


  Be aware that this is a BALL Bearing head, NOT AN AIR BEARING. It is 10 mil according to the part number. 
   
  I see that the link to the specs goes to a page on my website, but I do not know the seller or anything else about this head. 
   
  Don 
  Digitrak Communications, Inc. 
  www.digitrakcom.com 
   
  ----- Original Message ----- From: sgejwalton 
  To: QuadList 
  Sent: Monday, November 30, 2009 11:19 AM 
  Subject: [QuadList] Ampex Mark Ten 10 mil head 
   
  There is a second Ampex Mark Ten head on e-bay. Item number 400088699558, presumably 10 mil, since it does not have a "5 mil" sticker on it. 
   
  Steve Walton 
   
   
  _______________________________________________ 
  Please trim posts to relevant info when replying! 
  Send QuadList list posts to QuadList at quadvideotapegroup.com 
  Your subscribe, unsubscribe and digest options are here: 
  http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com 



------------------------------------------------------------------------------


  _______________________________________________
  Please trim posts to relevant info when replying!
  Send QuadList list posts to QuadList at quadvideotapegroup.com
  Your subscribe, unsubscribe and digest options are here:
  http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20091130/e5a496db/attachment-0005.html>


More information about the QuadList mailing list