[QuadList] Equipment Auction: VidiPax

[Don Norwood]

Hi Chris:

Yes, could be that it is just missing the knob.  Here's a pic of one on a MK-X head in a VR-1100.  The positioners were standard on the MK-XV for the AVR-2.  By the way, I understood that the 15 mil heads with the 10 mil gap area were not the greatest for interchange with standard 10 mil heads.


  ----- Original Message ----- 
  From: Chill315 at aol.com 


  There were some Mark 10 heads produced with a manual guide positioning adjustment.  Perhaps this one is that with the knob off the adjustment screw?  Also the 15 mil heads still laid down a 10 mil track.  The width of the head was made larger to hopefully give a longer life.

  Chris Hill


------------------------------------------------------------------------------


  _______________________________________________
  Please trim posts to relevant info when replying!
  Send QuadList list posts to QuadList at quadvideotapegroup.com
  Your subscribe, unsubscribe and digest options are here:
  http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20090914/ff92b4b5/attachment-0005.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Man Guide Positioner.jpg
Type: image/jpeg
Size: 19338 bytes
Desc: not available
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20090914/ff92b4b5/attachment-0003.jpg>