[QuadList] Smith splicer, etc.

[bill.spencer at northstarstudios.tv]

All,

 

I am working on a recovery project and have had a splice part on me.  If
anyone knows of a Smith splicer or a 2" audio straight cut splicer in or
near Nashville that I could borrow for a few days please let me know.

 

Also, some of these tapes were recorded with improper deviation in LBM
and the sync is low.  I can turn the demod level up so that the sync
locks and then run the video through a proc amp to bring it back to
normal, but it is still causing the MTBC in my TR-600 to have an
excessive amount of jitter.  Does anyone know of some old tricks to make
a TR-600 play LBM better?  Was there ever a LBM demod for the AVR-2 or
has anyone successfully modified one?  I have two extras so I have
something to experiment with.

 

Tapping the well of all wisdom for all things quad, I thank you in
advance.

 

Bill Spencer

RF Engineering Supervisor

NorthStar Studios, Inc.

3201 Dickerson Pike

Nashville, TN 37207

 

Phone 615.650.6000 ext. 6610

Cell 615.445.5616

Fax 615.650.6027

email bill.spencer at northstarstudios.tv
<mailto:bill.spencer at northstarstudios.tv> 

 

CONFIDENTIALITY NOTICE/HIPAA PRIVACY RULE: This message may contain
information that is privileged, confidential and exempt from disclosure
under applicable law. If you are not the intended recipient (or
authorized to act on behalf of the intended recipient) of this message,
please do not disclose, forward, distribute, copy, or use this message
or its contents. If you have received this communication in error,
please notify us immediately by return e-mail and delete the original
message from your e-mail system. Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20101014/f3aba114/attachment-0003.html>