[QuadList] Smith splicer, etc.

C. Park Seward park at videopark.com
Thu Oct 14 16:07:55 CDT 2010


The only reason to use a 5 mil head was to play a 7.5 ips tape. I don't know why someone would use a 5 mil head for a 15 ips tape. 

Best,
Park

C. Park Seward
818-535-2747 cell
541-476-6657 home
Visit us at: www.videopark.com
Sent from my iPhone 4

On Oct 14, 2010, at 1:16 PM, Tom Evans <tom at tom-evans.com> wrote:

> Bill,
> 
> Most of the Low Band Mono tapes I recall were recorded with a 5 mil head (not the standard 10 mil head).  
> 
> The digital TBCs of the AVR-2 and TR-600 generation were clocked by an oscillator locked to colorburst.  What happens when no colorburst is present?  Perhaps a VR-1200 with AMTEC could do better.
> 
> -Tom Evans (with more questions than answers)
> 
> 
> 
> On Thu, Oct 14, 2010 at 2:41 PM, <bill.spencer at northstarstudios.tv> wrote:
> All,
> 
>  
> 
> I am working on a recovery project and have had a splice part on me.  If anyone knows of a Smith splicer or a 2” audio straight cut splicer in or near Nashville that I could borrow for a few days please let me know.
> 
>  
> 
> Also, some of these tapes were recorded with improper deviation in LBM and the sync is low.  I can turn the demod level up so that the sync locks and then run the video through a proc amp to bring it back to normal, but it is still causing the MTBC in my TR-600 to have an excessive amount of jitter.  Does anyone know of some old tricks to make a TR-600 play LBM better?  Was there ever a LBM demod for the AVR-2 or has anyone successfully modified one?  I have two extras so I have something to experiment with.
> 
>  
> 
> Tapping the well of all wisdom for all things quad, I thank you in advance.
> 
>  
> 
> Bill Spencer
> 
> RF Engineering Supervisor
> 
> NorthStar Studios, Inc.
> 
> 3201 Dickerson Pike
> 
> Nashville, TN 37207
> 
>  
> 
> Phone 615.650.6000 ext. 6610
> 
> Cell 615.445.5616
> 
> Fax 615.650.6027
> 
> email bill.spencer at northstarstudios.tv
> 
>  
> 
> 
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20101014/9e522a30/attachment-0004.html>


More information about the QuadList mailing list