[QuadList] Smith splicer, etc.

[Don Norwood]

Hi Park:

I agree, a 1200 will play a standard LBM tape just fine.  The problem is when the original recording was made with improper carrier frequencies and/or deviation.  When that results in almost no sync amplitude, lots of things get "nervous"!

Don Norwood
Digitrak Communications, Inc.
www.digitrakcom.com

  ----- Original Message ----- 
  From: C. Park Seward 
  To: Quad List 
  Sent: Thursday, October 14, 2010 5:04 PM
  Subject: Re: [QuadList] Smith splicer, etc.


  Actually, my 1200B plays LBM perfectly with the NEC TBC. 


  Let me know if I can be of help. 



  Best,
  Park


  C. Park Seward
  818-535-2747 cell
  541-476-6657 home
  Visit us at: www.videopark.com
  Sent from my iPhone 4

  On Oct 14, 2010, at 1:16 PM, Tom Evans <tom at tom-evans.com> wrote:


    Bill,

    Most of the Low Band Mono tapes I recall were recorded with a 5 mil head (not the standard 10 mil head).  

    The digital TBCs of the AVR-2 and TR-600 generation were clocked by an oscillator locked to colorburst.  What happens when no colorburst is present?  Perhaps a VR-1200 with AMTEC could do better.

    -Tom Evans (with more questions than answers)




    On Thu, Oct 14, 2010 at 2:41 PM, <bill.spencer at northstarstudios.tv> wrote:

      All,



      I am working on a recovery project and have had a splice part on me.  If anyone knows of a Smith splicer or a 2” audio straight cut splicer in or near Nashville that I could borrow for a few days please let me know.



      Also, some of these tapes were recorded with improper deviation in LBM and the sync is low.  I can turn the demod level up so that the sync locks and then run the video through a proc amp to bring it back to normal, but it is still causing the MTBC in my TR-600 to have an excessive amount of jitter.  Does anyone know of some old tricks to make a TR-600 play LBM better?  Was there ever a LBM demod for the AVR-2 or has anyone successfully modified one?  I have two extras so I have something to experiment with.



      Tapping the well of all wisdom for all things quad, I thank you in advance.



      Bill Spencer

      RF Engineering Supervisor

      NorthStar Studios, Inc.

      3201 Dickerson Pike

      Nashville, TN 37207



      Phone 615.650.6000 ext. 6610

      Cell 615.445.5616

      Fax 615.650.6027

      email bill.spencer at northstarstudios.tv





    _______________________________________________
    Please trim posts to relevant info when replying!
    Send QuadList list posts to QuadList at quadvideotapegroup.com
    Your subscribe, unsubscribe and digest options are here:
    http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com


------------------------------------------------------------------------------


  _______________________________________________
  Please trim posts to relevant info when replying!
  Send QuadList list posts to QuadList at quadvideotapegroup.com
  Your subscribe, unsubscribe and digest options are here:
  http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20101014/7029bff9/attachment-0004.html>