[QuadList] VPR-80 QC switcher w/Tek 528 Octal plug--How totranslate function to Tek 1730?
C. Park Seward
park at videopark.com
Mon Jan 17 19:20:25 CST 2011
Don
Didn't the 1200 have that same round plug Ted is talking about?
Best,
Park
Sent from my iPhone
818-535-2747 cell
(541) 476-6657 hm
2" and 1" video transfers
On Jan 17, 2011, at 5:07 PM, "Don Norwood" <dwnorwood at embarqmail.com> wrote:
> Hi Ted:
>
> Ampex had an adapter cable to convert from the 528 to the 1730, and then a later version for the 1750 et al.
>
> I can scan the diagram for you. Also, a very helpful feature of the 1730 is the memory setups. You can use them to recall the test setups very easily.
>
> I'll send the scan shortly....have to go pull the file.
>
> Don Norwood
> Digitrak Communications, Inc.
> www.digitrakcom.com
>
> ----- Original Message -----
> From: Ted Langdell
> To: Quad List ; Old Vtr
> Sent: Monday, January 17, 2011 7:20 PM
> Subject: [QuadList] VPR-80 QC switcher w/Tek 528 Octal plug--How totranslate function to Tek 1730?
>
> Howdy from California (again) after a dozen days in Berlin...
>
> I'm updating the scopes in an Ampex VPR-80 sidecar package. A Tek 1720/1730 pair are replacing the original Tek 528/1420 setup in the sidecar.
>
> In connecting the wiring harness... we have a round 9-pin plug that went to the 528... (pictured) and no matching connector on the 1730.
>
> <DSC_6415-Cropped.jpg>
>
>
> The VPR-80 manual harness diagram shows that one of the two wires between the QC switcher and the scope connector is a "Sync Ctl" line.
>
> The other has -15 Volts (from the scope?) and goes from SubD Plug 9/Pin6 on the switcher to pins 2, 6 and 9 of 9-pin plug called P370 on the scope.
>
> It appears to change the scope's sync input when switching from video to Demod or AST Error modes.
>
> So, my question is... what pins do we use on the 1730 to accomplish the desired functionality?
>
> Please e-mail a reply that includes off-list to ted at flashscan8.us.
>
> I'll get it on my iPhone more quickly. Am putting the package together now for delivery tomorrow.
>
> Thanks much in advance.
>
> Will post pix with the results.
>
> Ted
>
> Ted Langdell
> Secretary
> Skype: TedLangdell
> e-mail: ted at quadvideotapegroup.com
>
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110117/5a03c197/attachment-0004.html>
More information about the QuadList
mailing list