[QuadList] RCA Headwheel

[Don Norwood]

Hi Dale:

I have a Spin refurbished MK-10 in use at the moment.  The association with Kodak is shown on the label.  They did use ferrite heads, and they supplied a special set of instructions regarding how to safely measure tip projection.  Here are a couple of pics of the head.......





Don Norwood
Digitrak Communications, Inc.
www.digitrakcom.com
  ----- Original Message ----- 
  From: Dale Lamm 


------------------------------------------------------------------------------


  Yes, Spin Physics was owned by Kodak, per the sales guy from Spin. Theirs was the first rebuild that allowed us to exceed 1000 hours on a MK-10 panel. I believe they used ferrite pole pieces. Remember the sales guy warning us to be very careful when using the Ampex tip height gauge.
    [snip]
    We used a lot of Spin Physics rebuilds at CBS, probably because the salesman would always bring in lots of donuts (Crumpets) for the guys, but I don't recall any major problems attributed to them.  Do I remember they were part of Kodak?
    [end]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20120820/e541dc8e/attachment-0004.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Spin1.jpg
Type: image/jpeg
Size: 80822 bytes
Desc: not available
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20120820/e541dc8e/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Spin2.jpg
Type: image/jpeg
Size: 80350 bytes
Desc: not available
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20120820/e541dc8e/attachment-0005.jpg>