[QuadList] OT: How to move a VPR-80 in a sidecar cabinetwithout a truck or trailer--AVR 2 Next??

[Ted Langdell]

Hi, Park,

Thanks.

The slip rings were inspected at the same time the brushes/rotors were  
done.

You'd mentioned the board connector problems in a previous post.  I'll  
pop them on the problem child and follow your recommendations... see  
if that makes a difference and report back.  May take some time to get  
to...

Ted



On Jan 20, 2011, at 8:45 AM, C. Park Seward wrote:

> Ted,
>
> The connectors for the large boards in the top of the machine need  
> to be cleaned every so ofter or at least re-seated. They had trouble  
> with the connectors, even sending a field tech to bend them a little  
> with a home-made tool to make them a bit tighter.
>
> If you have the old slip rings, that needs to be cleaned every so  
> often. The dust starts to short out the AST brushes.
>
> And yes, the brushes and disk need to be cleaned on the scanner  
> motor. I used an eraser.
>
> Best,
> Park
>
> C. Park Seward
> Cell: 818-535-2747
> Home: 541-476-6657
> 2" Quad and 1" "C" transfers
> Visit us: http://www.videopark.com
>
>
>
>
> On Jan 19, 2011, at 9:04 PM, Ted Langdell wrote:
>
>> A followup visit is planned for two weeks from now. If you have any  
>> VPR-80 operating advice I should pass along, please post.
>>
>
>
> _______________________________________________
> Please trim posts to relevant info when replying!
> Send QuadList list posts to QuadList at quadvideotapegroup.com
> Your subscribe, unsubscribe and digest options are here:
> http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com


Ted Langdell
Secretary
Skype: 	TedLangdell
e-mail:	ted at quadvideotapegroup.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20110120/25c1c25a/attachment-0004.html>