[QuadList] PAL-M playback on AVR-2 in UK--

[Glenn Gundlach]

Just FYI PAL-M subcarrier is not 4.42 MHz. The 4FSc is 909 times H rather than 910H for NTSC so the subcarrier is a little lower than 3.58. That said, I don't know how you'd play it back and convert it to NTSC. 

G²

--- On Tue, 2/7/12, Ted Langdell <ted at quadvideotapegroup.com> wrote:

From: Ted Langdell <ted at quadvideotapegroup.com>
Subject: [QuadList] PAL-M playback on AVR-2 in UK--
To: "Quad List" <QuadList at quadvideotapegroup.com>
Date: Tuesday, February 7, 2012, 10:28 AM

Please trim posts to relevant info when replying. Change subject to reflect thread direction. Thanks.
_______________________________________________An e-mail from the UK arrived in my mailbox just a few ago.  Ian writes:
Hi,

Any idea how you could playback a PAL-M recording on an Ampex AVR-2.?

The AVR-2 is a PAL/625 at 5.5MHz machine where the PAL –M recordings format is 525/PAL at 4.42MHz
Any info  would be much appreciated?

Kind Regards,
Ian
You can post replies to the list.  I'll send an e-mail with your answers to Ian.  I've invited him to subscribe.

Ted
Ted LangdellSecretaryFifth Annual Quad Videotape Group Lunch at NAB12:30pm, Tuesday, April 17, 2012Lower South Hall REAR food concession area
See us at NAB 2012, April 16-19 in Booth SL-9607Use code 2012 for your free NAB Exhibits Pass




-----Inline Attachment Follows-----

Please trim posts to relevant info when replying. Thanks!
_______________________________________________

Send QuadList list posts to QuadList at quadvideotapegroup.com
Your subscribe, unsubscribe and digest options are here:
http://mail.quadvideotapegroup.com/mailman/listinfo/quadlist_quadvideotapegroup.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://quadvideotapegroup.com/pipermail/quadlist_quadvideotapegroup.com/attachments/20120207/d1eba50a/attachment-0004.html>